Loading...
Loading...

The Davone Solo loudspeaker takes a novel approach on designing a large high end floor standing loudspeaker. Where most settle for cubism, the Solo combines optimal driver placement and clever internal acoustics with an elegant design. Inspired by the Verner Panton 1-2-3 chair which according to Panton was meant to “grow up out of the floor”, the Solo delivers a sonic picture that is open, detailed controlled and addictive. If we had to choose, the Solo would be our favorite. Simply because it masters design for sound. The Solo is handbuild in Denmark.

Shivers guaranteed

Systematic investigations in our controlled listening room have led to a new 24dB/oct Linkwitz-Riley cross-over and tweeter acoustic lens for an improved room response. The increased efficiency of the new midrange driver, the accurate pistonic tweeter behavior and further refined bass tuning are making the Solo HR a precisely orchestrated and mature loudspeaker. The Solo HR delivers your music with just that little more texture for guaranteed shivers.

Enhanced CAD

Just like the acoustic design, the Solo represents the latest in cabinet construction. Enhanced computer aided design (CAD) capabilities have made it possible to create a unique design that takes wood bending to the next level. Through bending and twisting, the side panels are stiffer and more irregular. Both enhancements improve the acoustic properties leading to a cleaner sound. A typical example of form follows function.

Handbuild in Denmark

Most manufacturers shy away from using bend plywood for loudspeaker cabinets. Which is understandable because it may twist and turn in undesired directions, making accurate machining of parts and final assembly difficult. This is not critical in the typical application in furniture. Speaker cabinet construction is a whole other matter though. The production of Solo would not have been possible without our committed design and the extra care of hand build production.

Specifications:

Frequency response
30 – 22.000 Hz

Impedance
4 ohm, 2.5 ohm minimum at 450Hz @ 0 degrees

Sensitivity
89 dB/2,83V/m

Max power
150W (IEC 268-5)

Woofer
8” , Geometrically reinforced aluminum cone, soft low damping rubber surround, rigid die cast alu chassis with extensive venting

Mid
4″, Ceramic coated aluminium membrane, soft low damping rubber surround, optimized low distortion motor system

Tweeter
1″, Anodised aluminium dome, flow optimized vented pole piece with non-reflective chamber, saturation controlled motor system

Cross over
200 Hz, 2.2kHz, 24dB/Oct Linkwitz Riley

System
Bass reflex/ Closed

Cabinet
10 layer beech wood form pressed veneer with multiple internal stiffeners.

Weight
30kg / piece

Current version
HR

Finish

Walnut

Davone Solo Loudspeaker

Made in Denmark

$13,495

Contact us

Contact us for consultation and quotes. Get honest advice from passionate music and HiFi enthusiasts.

Free & fast shipping Australia wide*

Free shipping on orders over $99. Shipping times are generally 2-5 business days, longer for west coast.

Secure Shopping

Purchase with confidence using the most popular secure checkout method on the internet (Stripe).

Join the HiFi Collector Club

Loading...

The Davone Solo loudspeaker takes a novel approach on designing a large high end floor standing loudspeaker. Where most settle for cubism, the Solo combines optimal driver placement and clever internal acoustics with an elegant design. Inspired by the Verner Panton 1-2-3 chair which according to Panton was meant to “grow up out of the floor”, the Solo delivers a sonic picture that is open, detailed controlled and addictive. If we had to choose, the Solo would be our favorite. Simply because it masters design for sound. The Solo is handbuild in Denmark.

Shivers guaranteed

Systematic investigations in our controlled listening room have led to a new 24dB/oct Linkwitz-Riley cross-over and tweeter acoustic lens for an improved room response. The increased efficiency of the new midrange driver, the accurate pistonic tweeter behavior and further refined bass tuning are making the Solo HR a precisely orchestrated and mature loudspeaker. The Solo HR delivers your music with just that little more texture for guaranteed shivers.

Enhanced CAD

Just like the acoustic design, the Solo represents the latest in cabinet construction. Enhanced computer aided design (CAD) capabilities have made it possible to create a unique design that takes wood bending to the next level. Through bending and twisting, the side panels are stiffer and more irregular. Both enhancements improve the acoustic properties leading to a cleaner sound. A typical example of form follows function.

Handbuild in Denmark

Most manufacturers shy away from using bend plywood for loudspeaker cabinets. Which is understandable because it may twist and turn in undesired directions, making accurate machining of parts and final assembly difficult. This is not critical in the typical application in furniture. Speaker cabinet construction is a whole other matter though. The production of Solo would not have been possible without our committed design and the extra care of hand build production.

Specifications:

Frequency response
30 – 22.000 Hz

Impedance
4 ohm, 2.5 ohm minimum at 450Hz @ 0 degrees

Sensitivity
89 dB/2,83V/m

Max power
150W (IEC 268-5)

Woofer
8” , Geometrically reinforced aluminum cone, soft low damping rubber surround, rigid die cast alu chassis with extensive venting

Mid
4″, Ceramic coated aluminium membrane, soft low damping rubber surround, optimized low distortion motor system

Tweeter
1″, Anodised aluminium dome, flow optimized vented pole piece with non-reflective chamber, saturation controlled motor system

Cross over
200 Hz, 2.2kHz, 24dB/Oct Linkwitz Riley

System
Bass reflex/ Closed

Cabinet
10 layer beech wood form pressed veneer with multiple internal stiffeners.

Weight
30kg / piece

Current version
HR

Finish

Walnut

Scroll to Top