Loading...
Loading...

FEATURES:

  • Power Output: 400W RMS continuous into 4 Ohms
  • Distortion THD: <0.007% at 1kHz at all powers up to 400W into 4 Ohms, <0.03% at 7kHz at all powers up to 400W
  • Unbalanced and Balanced Voltage Inputs
  • Mains Voltage: 100 – 120VAC or 190 – 250VAC
  • Remote trigger switch between On & Standby
  • Command Functions:
    • Switch between On & Standby
    • Ability to inhibit individual amplifier modules
    • Amplifier module will indicate Over Temperature condition
  • Halcro Reliability Assurance Service

 

SPECIFICATIONS:

Power Output

  • 400W RMS continuous into 4 Ohms
  • Frequency Response (-3db) 5 Hz – 45kHz

Audio
Inputs, selectable

  • Unbalanced: RCA sockets
  • Balanced: XLR sockets

Outputs

  • Internally bridged: Binding Posts

 

Command Functions

  • Switch between On & Standby
  • Ability to inhibit individual amplifier modules
  • Amplifier module will indicate Over Temperature condition
  • Amplifier module will indicate Over Current condition
  • Halcro Reliability Assurance Service

 

Gain

  • Unbalanced and balanced: 29x = 29dB

 

Power Supply

  • Universal switch mode
  • Power factor corrected
  • Fully protected
  • Compliant in all countries

 

Fault Indications

  • LED turns red if Heatsink temperature exceeds 78°C
  • LED flashes red if current limit exceeded

 

Distortion

  • THD:<0.007% at 1kHz at all powers up to 400W into 4ohms
  • 0.03% at 7kHz at all powers up to 400W
  • Noise: <30nV/sqrt(Hz) @ 1kHz referred to input

 

Impedance
Input

  • Unbalanced: 10k Ohms
  • Balanced: 10k Ohms

Output impedance at 7kHz

  • <80 milliohms

 

Power
Consumption

  • Idle: <14W
  • 350W with 4 Ohm load: 94% efficient)

 

Mains Voltage

  • 100-250 VAC

 

Dimensions

  • Weight: 49.8lb or 22.4 kg
  • Height: 7 inches or 169mm
  • Width: 17 inches or 438mm
  • Depth: 16 inches or 410mm

Halcro Logic MC30 – 3 Channel Power Amplifier

Made in Australia

SOLD OUT. Contact us for alternative recommendations.

3 Channel Power Amplifier
Rack Mountable or Free Standing
Full control via RS 232 or ETHERNET connection
3 year warranty

 

$2,795

Out of stock

Contact us

Contact us for consultation and quotes. Get honest advice from passionate music and HiFi enthusiasts.

Free & fast shipping Australia wide*

Free shipping on orders over $99. Shipping times are generally 2-5 business days, longer for west coast.

Secure Shopping

Purchase with confidence using the most popular secure checkout method on the internet (Stripe).

Join the HiFi Collector Club

SOLD OUT. Contact us for alternative recommendations.

3 Channel Power Amplifier
Rack Mountable or Free Standing
Full control via RS 232 or ETHERNET connection
3 year warranty

 

Loading...

FEATURES:

  • Power Output: 400W RMS continuous into 4 Ohms
  • Distortion THD: <0.007% at 1kHz at all powers up to 400W into 4 Ohms, <0.03% at 7kHz at all powers up to 400W
  • Unbalanced and Balanced Voltage Inputs
  • Mains Voltage: 100 – 120VAC or 190 – 250VAC
  • Remote trigger switch between On & Standby
  • Command Functions:
    • Switch between On & Standby
    • Ability to inhibit individual amplifier modules
    • Amplifier module will indicate Over Temperature condition
  • Halcro Reliability Assurance Service

 

SPECIFICATIONS:

Power Output

  • 400W RMS continuous into 4 Ohms
  • Frequency Response (-3db) 5 Hz – 45kHz

Audio
Inputs, selectable

  • Unbalanced: RCA sockets
  • Balanced: XLR sockets

Outputs

  • Internally bridged: Binding Posts

 

Command Functions

  • Switch between On & Standby
  • Ability to inhibit individual amplifier modules
  • Amplifier module will indicate Over Temperature condition
  • Amplifier module will indicate Over Current condition
  • Halcro Reliability Assurance Service

 

Gain

  • Unbalanced and balanced: 29x = 29dB

 

Power Supply

  • Universal switch mode
  • Power factor corrected
  • Fully protected
  • Compliant in all countries

 

Fault Indications

  • LED turns red if Heatsink temperature exceeds 78°C
  • LED flashes red if current limit exceeded

 

Distortion

  • THD:<0.007% at 1kHz at all powers up to 400W into 4ohms
  • 0.03% at 7kHz at all powers up to 400W
  • Noise: <30nV/sqrt(Hz) @ 1kHz referred to input

 

Impedance
Input

  • Unbalanced: 10k Ohms
  • Balanced: 10k Ohms

Output impedance at 7kHz

  • <80 milliohms

 

Power
Consumption

  • Idle: <14W
  • 350W with 4 Ohm load: 94% efficient)

 

Mains Voltage

  • 100-250 VAC

 

Dimensions

  • Weight: 49.8lb or 22.4 kg
  • Height: 7 inches or 169mm
  • Width: 17 inches or 438mm
  • Depth: 16 inches or 410mm
Scroll to Top