|Cabinet||Composite 18 to 36mm HDF laminated to 4mm sprung steel plate. Differential Cancellation bracing utilising 25mm hardwood dowel and 18mm Birch Plywood.|
|Crossover construction:||Full hardwire hand build, all joints are high pressure low contact area cold weld sealed with Teflon amalgamated wrap.
12awg aircored inductors, low tension handwound double stabilised.
Metalised Polypropelene 250volt. Utilising copper film and foil bypass capacitors.
Dale Vishay non inductive wire wound 6.5 watt to 13 watt and Mundorf 10watt metal oxide depending on location in the circuit.
Proprietary integration of enclosure substrate steel plate with Crossover network groundplanes.
|Tweeter||1 inch chambered textile dome|
|Mid-bass driver||6.5 inch Nomex Diaphram|
|Wiring||Solid core copper from 2 to 4 strands depending on location in the circuit.|
|Input connection||Eichmann cablepods|
|Frequency Response||35 – 25Khz +/- 1.5db (in room)|
|Sensitivity||86.5dB @ 2.83V/m|
|Impedance||8 ohms nominal|
|Reccomended amplifier wattage||20 – 700W|
|Cabinet dimensions (HxWxD)||420 x 215 x 400mm (16.5 x 8.4 x 15.7″)|
|Weight (1 speaker)||25kg (55 lbs)|
All specifications may be subject to change without notice.
Each pair of ML2’s are stringently tested and hand tuned.
The ML2 is the next generation of highend two way monitors from Lenehan Audio. Designed for absolute no compromise music systems.
Construction is handbuilt and meticulous in every sense of the word. The composite enclosure panels are first handbuilt piece by piece starting with the 36mm HDF 4mm steel plate composite baffle. After all composite panels are individually constructed the enclosure is assembled using probably the worlds strongest epoxy adhesive.
Steel rod, 25mm hardwood dowel and Birch Ply differential bracing are incorporated to produce an enclosure with phenomenally low energy storage.
A single ML2 enclosure takes 6 hours of hand sanding before being painted. The finished Loudspeaker looks like it has been machined from a solid billet.
In rooms of smaller to average size, ie 50cubic mtrs 1700CuFt to 120cubic mtrs an ML2 will produce authoritive bass down to 35hz and produce resolution smoothness and speed akin to the very best full range electrostatic transducers.
When mounted to it’s own dedicated stand the ML2 will weigh approximately 65kg’s (143 lbs) each.