FEATURES:
- Power Output: 350W RMS continuous into 4 Ohms
- Distortion THD: <0.007% at 1kHz at all powers up to 350W into 4 Ohms, <0.03% at 7kHz at all powers up to 350W
- Unbalanced and Balanced Voltage Inputs
- Thermally controlled forced air cooling
- Mains Voltage: 100 – 120VAC or 190 – 250VAC
- Remote trigger switch between On & Standby
- Command Functions:
- Switch between On & Standby
- Ability to inhibit individual amplifier modules
- Amplifier module will indicate Over Temperature condition
- Halcro Reliability Assurance Service
SPECIFICATIONS:
Inputs, selectable
- Unbalanced: RCA sockets
- Balanced: XLR sockets
Outputs
- Internally bridged: Binding Posts
Command Functions
- Switch between On & Standby
- Ability to inhibit individual amplifier modules
- Amplifier module will indicate Over Temperature condition
- Amplifier module will indicate Over Current condition
- Halcro Reliability Assurance Service
Gain
- Unbalanced and balanced: 29x = 29dB
Power Supply
- Universal switch mode
- Power factor corrected
- Fully protected
- Compliant in all countries
Fault Indications
- LED turns red if Heatsink temperature exceeds 78°C
- LED flashes red if current limit exceeded
Distortion
- THD:<0.005% at 1kHz at all powers up to 350W into 4ohms
- 0.02% at 7kHz at all powers up to 350W (typically <0.01% at 350W)
- Noise: <30nV/sqrt(Hz) @ 1kHz referred to input
Impedance
Input
- Unbalanced: 10k Ohms
- Balanced: 10k Ohms
Output impedance at 7kHz
- <80 milliohms
Power
Consumption
- Idle: <14W
- 350W with 4 Ohm load: <22W heat (>94% efficient)
Mains Voltage
- 100-250 VAC
Dimensions
- Weight: 25.0 kg
- Height: 7 inches or 169mm
- Width: 17 inches or 438mm
- Depth: 16 inches or 410mm
