Mojo, an immersive experience
Just 30 centimeter tall, the Mojo has a habit of defying expectations. With 360 degrees dispersion of sound over the entire frequency range, the Mojo projects a tangible soundstage that presents music with startling presence. Position it with care and the Mojo will simply put you inside the recording venue. Movie fans have certainly discovered these qualities of the Mojo. Without the complications of multichannel sound, the Mojo makes watching movies a truly immersive experience. The Mojo is handbuilt in Denmark.
360° cross over
The Mojo cross over plays an integral part in obtaining 360 degrees dispersion over the entire frequency range. Through careful schematic design and component quality selection, it divides and balances the sound to woofer and tweeter to make optimal use of both the natural and aided dispersion of both drivers.
Powerfull bass
Thanks to the very low cross over point, Mojo can use a woofer optimized for low frequency reproduction only. Mounted invisible in the bottom, the woofer features a massive 33mm voice coil with a maximum deflection of 22mm peak-peak. The downward firing reflex conduct furthermore makes it easy to place Mojo in the listening environment.
Dispersion cone
The dispersion cone sits directly over the up-firing 3” full range neodymium magnet driver. By carefull acoustic design of shape and dimensions, the dispersion cone complements the natural dispersion of the driver at higher frequencies. Together, driver and reflector obtain 360° dispersion.
The stand
By placing the Mojo on the dedicated stand, the sound quality will be improved. Especially the bass range and imaging will become better defined due to the larger distance from the floor. After removal of the three feet, the Mojo can be bolted directly onto the stand. The added mass will further improve the bass range, and with the large and heavy baseplate, the stand is firm. The loudspeaker cable can be channeled through the vertical tube. Stand dimensions 63 x 30cm. The retail price is € 400,- per pair incl. VAT
Finishes
Specifications:
Frequency response
40 – 20.000 Hz (in room)
Impedance
4 ohm, 2.6 ohm minimum at 55Hz
Sensitivity
86 dB/2,83V/m
Max power
80 W (IEC 18.3)
SubWoofer
5 1/4” subwoofer, Xmax 22mm peak-peak
Tweeter
3”, loaded with volume seperate from woofer neodymium magnet
Cross over
200 Hz
System
Bass reflex
Cabinet
6 layer vacuum shaped veneer
Weight
4,5kg / piece